|
.
.
Der findes mange andre modeller af Paul chen’s våben og her viser vi kun nogle, som vi normalt har på lager.
Men de fleste andre modeller kan bestilles hjem.
Så hvis den model du kigger efter ikke lige er der, så blot kontakt os pr. email eller tlf.
|
|
|
|
|
Varen er på lager, Leveringstid 1-4 dage.
Kræver tilladelse
100410
Paul Chen Danish War Axe
XH2099N - Danish War Axe Antique Finish
The Danish Axe is undoubtedly a fine example of the use of peacetime agricultural tools as weapons in time of war.
Equally at home felling trees or adversaries, the axe evokes a fearsome picture of the woodsman at war.
KEY FEATURES:
Historically Accurate
Fully Functional
Hardwood Shaft
MEASUREMENTS:
BLADE LENGTH: ca. 29 cm.
OVERALL LENGTH: ca. 100,5 cm.
|
|
920,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100554
Paul Chen Mammen Økse
XH2041 - Mammen Axe
The axe, inherited from the Frank’s wars with the Romans, remained an ever-present Viking weapon.
It also demonstrated the Scandinavian genius for evolving specialized weaponry.
The smaller axes are sized to be carried thrust through a belt, to serve as a backup weapon and being one-handed, they were used in combination with a shield.
The Mammen Axe, one of the best-known and best-decorated examples of the small Viking throwing axe, is a perfect example of the Viking’s blend of art and war.
Excavated from a famous 10th century barrow near Mammen, Denmark, the original is decorated with silver-inlaid engraving in the typical Celtic manner.
Our recreation of this beautiful piece is a tribute to the creative as well as the martial side of this dynamic, influential culture.
KEY FEATURES:
Historically accurate
Incised silver decoration
Fully functional
MEASUREMENTS:
BLADE LENGTH: 4“ ca. 10,1 cm.
HANDLE LENGTH: 17 3/4” ca. 45 cm.
OVERALL LENGTH: 17 1/2“ ca. 44,4 cm.
THICKNESS: .270 ca. 0,68 cm.
|
|
699,00
|
|
|
Varen er på lager, Leveringstid 1-4 dage.
Kræver tilladelse
100623
Paul Chen Practical Scramasax
SH2297 - Practical Scramasax
The Practical Scramasax has been produced in response to many requests from Viking re-enactors.
Its 12 ½” blade, with a rounded tip and 1/16” wide edge, make it an ideal secondary weapon.
A horizontal-carry scabbard is provided.
KEY FEATURES:
Made for the re-enactor
Authentic look and feel
Complies with safety requirements
MEASUREMENTS:
Blade length: 12 1/2 ca. 31,75 cm.
Overall length: 17 3/4 ca. 45 cm.
|
|
840,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100344
Paul Chen Practical Viking Sword
Our Practical Viking sword is tailored to the needs of the re-enactor and very affordable. Featuring authentic hilt styling, with fully tempered un-edged and un-pointed blades, these swords are made to withstand rugged use while providing the level of safety required by many of today's re-enactment societies. It features a classically simple hilt, with a permanently-mounted grip and riveted tang for safety.
The blade is fullered for balance and features 1/16" edges and a rounded tip. The steel-mounted wooden scabbard is left unfinished for owner customization.
KEY FEATURES:
Made for the re-enactor
Authentic look and feel
Complies with safety requirements
MEASUREMENTS:
BLADE LENGTH: ca.71 cm.
HANDLE LENGTH: ca. 14,5 cm.
OVERALL LENGTH: ca. 85 cm.
|
|
920,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100408
Paul Chen Godfred Viking Sword
SH1010 - Godfred Viking Sword
Named for the feared 8th century Viking raider, our Godfred Sword is built around a beautifully patterned folded steel blade to replicate the pre-9th century originals.
The interwoven leather grip, complemented by a Damascus guard and pommel, is matched by the leather-covered wood scabbard with bronze detailing and integral belt hooks.
Superbly balanced, due to the deeply fullered distal tapered blade profile, the Godfred is a true tribute to the legendary Norse smiths.
Made by Hanwei.
Key Features:
Interwoven leather grip
Damascus guard and pommel
Leather-covered wood scabbard with bronze detailing and integral belt hooks
Specifications:
Blade length: 28 3/4“ ca. 73 cm.
Handle length: 5 3/4” ca. 14,6 cm.
Overall length: 34 3/4“ ca.88,3 cm.
Weight: 2lb 7oz
Point of Balance: 4"
Point of Percussion: 20"
Width at Guard: 1.87"
Width at Tip: 1.21"
Thickness at Guard: .22"
Thickness at Tip: .14"
Specs will vary slightly from piece to piece.
|
|
3.995,00
|
|
|
Varen er på lager, Leveringstid 1-4 dage.
Kræver tilladelse
100561
TILBUD! Paul Chen Bastard Sword
SH2250 - Bastard Sword
The strong and fearless Swiss and Germans originally carried these early weapons, although bastard swords soon became popular in other regions such as the British Isles and Europe.
The term bastard undoubtedly comes from the fact that the sword, because of its design, has no legitimate claim to being classified as either a single-handed or two-handed weapon.
The two-handed sword was a weapon developed for the use of the foot soldier and had became quite common by the early 1500’s.
The combat styles developed for the two-handed sword were the particular specialty of the Northern European Cultures, with the Germanic nations being quite active in its development and use.
Historically accurate
Great for re-enactors
MEASUREMENTS:
BLADE LENGTH: 38 3/4“ ca. 98,4 cm.
OVERALL LENGTH: 50 1/8“ ca. 127,3 cm.
THICKNESS: .210 ca. 0,53 cm.
Normal pris 2125 kr.
|
|
1.750,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100742
Paul Chen Practical Norman Sword
SH2326 - Practical Norman
An important addition to our European practical line is the Practical Norman sword,
based on a classic 11th century pattern popular during the Norman Invasion of Britain.
The high-carbon deeply-fullered blade is light and well-balanced, with the wide edges required by the re-enactment community.
The guard is wider than that of the earlier Viking designs that preceded this pattern and the pommel is of the “tea-cosy” type The grip is grooved and leather-wrapped and the scabbard is left plain for owner decoration.
Made by Hanwei.
Specifications:
Blade length: 30” ca. 76 cm.
Overall length: 36” ca. 91 cm.
Specs will vary slightly from piece to piece.
|
|
995,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100507
Paul Chen Knight Practical Single-Hand Sword
SH2046 - Practical Single-Hand Sword
Our Practical Single-Hand sword is tailored to the needs of the re-enactor and very affordable.
Featuring authentic hilt styling, with fully tempered un-edged and un-pointed blades, these swords are made to withstand rugged use while providing the level of safety required by many of today's re-enactment societies.
It features a classically simple hilt, with a permanently-mounted grip and riveted tang for safety.
The blade is fullered for balance and features 1/16" edges and a rounded tip.
The steel-mounted wooden scabbard is left unfinished for owner customization.
KEY FEATURES:
Made for the re-enactor
Authentic look and feel
Complies with safety requirements.
MEASUREMENTS:
BLADE LENGTH: ca. 76 cm.
HANDLE LENGTH: ca. 16,5 cm.
OVERALL LENGTH: ca. 92,5 cm.
|
|
995,00
|
|
|
Ikke på lager (Kontakt os for nærmere info.)
Kræver tilladelse
100625
Paul Chen Practical Hand-and-a-half Sword
SH2106 - Practical Hand-and-a-Half Sword
The Practical Hand-and-a Half sword is based on the Albrecht sword, a classic design from the early part of the 15th century, with a simple cruciform hilt, flattened diamond-section blade and typical hand-and-a-half grip.
With a weight of just 3 ¼ lbs. it handles very well without tiring the player during a long day in the field.
Our Practical broadswords (SH2106, SH2046, SH2047) are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat.
These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades.
They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.
The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness.
While the blades are substantial, they are fullered to provide balance and good handling characteristics.
They feature 1/16” wide edges and rounded tips for safety.
The tangs are also substantial, with radiused corners at the blade shoulders and no welds.
The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt.
The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems.
The scabbards now feature belt rings that adjust to allow vertical or horizontal carry.
The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.
KEY FEATURES:
wooden scabbard
fullered blade
in the practical series by Hanwei
MEASUREMENTS:
Blade length: 34“ ca. 86 cm.
Handle length: 6 1/4” ca. 15,8 cm.
Overall length: 43 3/4“ ca. 111 cm.
|
|
1.075,00
|
|
|
|